Week 62  This week we get more brass bulkheads

The bits we received

And what we did with them

I've fitted the hatches, doors and rain covers.  The next job I'm going to do is fit the grills that are supplied in issue 68 (which I haven't got yet).  I'm going to do this before I bend the bulkhead as I think it will be easier to fit them straight while the part is still flat.

I decided that the vents would actually be big enough to fit later without too much trouble, so I have bent the part ready to glue in place.  Simply a case of bending it round the wooden part that it will be fitted to.

Here is the bulkhead glued in place.  It was glued with Araldite Precision, and held with clamps while it set.  

 

Things not yet done

Fitting the fore deck
Stern deck part 63 not fitted.
Fixing deck
Fit resin stern part 70
Fit the bilge keels
Fit sea chest grills
Fit the resin bow piece
Add hanger side doors : Done
Week 54
Fill the nail heads on barbette Caesar
Fit hanger door : Done
Week 60
Fit bulkheads in week 61
Fit the bulkhead in week 62

Hot tip of the week

Don't forget to work on a sheet of plastic to stop the bulkhead being glued to the work surface.

How many hours does it take to build the model ??

This week :

3 hrs

Running total :

hrs

Take me back to week 61

Take me to week 63